The new T7 Long Wheelbase with PLM Intelligence tractor series builds on the legacy of its acclaimed T7 tractor family, expanding and reinforcing all the critical areas that determine the success of modern agricultural operations, to deliver the allround top performance and comfort levels demanded by today’s largest contractors and arable farmers.

The post NEW HOLLAND T7 LWB WITH PLM INTELLIGENCE appeared first on Ernest Doe.

• Boomer 35 and 40 models feature 12×12 synchronized shuttle shift (SSS) transmission as standard
• Boomer 45, 50 and 55 models feature a 16×16 SSS transmission, with creeper option as standard
• SSS transmissions mean you don’t have to come to a complete stop before shuttling and the shuttle lever is ergonomically positioned next to the steering wheel
• Boomer 25 models feature a 2-range hydrostatic transmission, or the option of a 6×2 mechanical transmission
• A 3-range hydrostatic transmission is available on the Boomer 35 to Boomer 55 models
• All hydrostatic models have 2 pedals, for forward and reverse travel and make shuttling and choosing the right speed very easy
• All hydrostatic models feature the new EZ Speed function, when activated it automatically increases engine speed in relation to how far the hydrostatic pedal is pushed
• Class 3 Boomers equipped with the hydrostatic transmission and Boomer Suite cab, are available with the new servo assisted drive pedal option to lower the effort required to operate the pedals

MID-MOUNT HYDRAULICS

Get the most out of your Boomer by ordering the deluxe hydraulic pack, available on Boomer 35 – 55 hydrostatic models. This includes factory fitted midmount hydraulics with joystick control, and a mid-mounted PTO.

READY FOR ANY JOB

Whether you need to mow the lawn, top a paddock, dig a drain, cultivate the garden, clear snow, clean a stable yard or install a fence, Boomer tractors are for you. These tractors make it easy to change implements so you can move quickly from job to job.
• Category I three-point hitch
• One rear hydraulic remote as standard on the 25 model
• Two rear hydraulic remotes as standard on the 35, 40, 45, 50 and 55 models
• Independent, electro-hydraulic 540-rpm rear PTO on the 25, 35 and 40 models
• Independent, electro-hydraulic three-speed (540 / 540E / 1,000rpm) rear PTO on the 45, 50 and 55 models
• New auto-PTO function to switch on/off the PTO as the linkage is raised/lowered on 35, 40, 45, 50 and 55 models
• Electro-hydraulic independent mid-PTO to power mid and front-mount implements is standard on all hydrostatic versions
• Ground drive PTO option available on Boomer 40 and 50 models with 16×16 transmission

The post New Holland Boomer 25C-55 appeared first on Ernest Doe.

When it’s slippery and wet there is no need to fret. The Boomer 25 Compact’s standard, mechanically engaged 4WD will power you through the tough spots. With standard power steering and its 4WD axle’s tight turning design, manoeuvring the Boomer 25 Compact in tight spaces, even with a full bucket, is easy.

MORE HYDRAULIC FLOW = EFFICIENT ATTACHMENT OPERATION

Boomer’s robust hydraulic system provides 17.4Lpm of dedicated flow for implement/ attachment operation. With over 450kg of 3-PT lift capacity you will be able to make the most of heavy implements like a rotary cutter, box blade or tiller. A separate 8Lpm steering pump ensures low effort maneuvering at all times.

POWER TO LOAD, MOW AND MORE

The Boomer 25 Compact tractor features a Stage V compliant, naturally aspirated, rugged, reliable and fuel efficient 3 cylinder diesel engine, delivering 25hp(CV) at 3,000rpm: more than enough to perform your toughest chores.The large fill opening, 25L fuel tank lets you complete more tasks between easy fill-ups. Boomer saves you time and money when it comes to maintenance, too. Convenient access to service points makes performing routine maintenance quick and easy.

The post New Holland Boomer 25 Compact appeared first on Ernest Doe.

T4S Stage V tractors are designed for hard work yet offer extended service intervals of 600 hours. All daily maintenance checks are quick and easy to make which means you’ll spend more time doing what a T4S does best: working. Want more? How about fuel efficient, reliable common rail engines that are biodiesel compliant.

ABSOLUTE DRIVING PLEASURE

From entry-level ROPS to the new generation four-post cab with optional air suspended seat, putting the operator in comfortable control is a priority. T4S cab tractors set new standards in this tractor class, with panoramic visibility of all implements. Powerful heating and air conditioning keeps you comfortable in all seasons. Those specifying a ROPS version do not miss out either, a high comfort suspended seat and well positioned controls come as standard.

VERSATILITY

Compact and manoeuvrable, with the hydraulic power and versatile transmission choice to suit diverse needs, a T4S can be your one tractor solution. It is equally at home performing loader work in the yard with the new 555LU loader, to working a wide range of attachments in the field, park or estate. With ROPS or cab, two- or four-wheel drive, the T4S delivers versatility as standard.

POWER AND PRODUCTIVITY

The smooth running S8000 series engine packs an efficient and reliable power punch of up to 75hp(CV) with outstanding fuel economy and impressive torque characteristics. Offering the ideal balance between power, weight and size, a T4S is designed to offer dependable performance across a wide range of tasks. It is the power and productivity choice for small farms and dairy units, with a specification to suit applications as diverse as municipal works to estate and contract operations.

The post New Holland T4S appeared first on Ernest Doe.

The entire T4 F N V range complies with Stage V emissions standards, on the T4.90 models and above this is achieved thanks to the new Compact HI-eSCR 2 technology developed by FPT Industrial. This innovative after treatment system is a maintenance free and all after treatment components are concealed neatly under the hood to maintain the best visibility to the front and sides. In addition it makes mounting mid mounted implements easier thanks to the space created.

A WIDE CHOICE OF EFFICIENT TRANSMISSIONS

Thanks to the modular design of the new T4 F N V tractors, the transmissions can be easily matched to the end user’s needs. Advanced features include a new ergonomic gear leveller position, new creeper engagement by just pushing a button and the ability to adjust the Powershuttle aggressiveness. New options includes a new Parking lock feature now available on Powershuttle transmissions as well as on Dual Command versions. Shuttle reverse and PTO are now have fully configurable engagement settings in order to have the right adjustment for the application.

ALL NEW FRONT AND REAR LINKAGE

Compatible with all T4 F N V tractor models, the new front linkage option has a lift capacity of up to 1500kg. Compatible with a SuperSteer front axle, the front linkage is available with or without front PTO. The rear linkage has been completely redesigned with 2 external lift cylinders providing a lift capacity of up to 2519kg. Mechanical Draft Control with proven Lift-O-Matic system is standard on all models and Electronic Draft Control is optional.

HYDRAULIC PERFORMANCE

Have you ever thought about just how much hydraulic flow you actually need? All T4 F N V tractors are fitted with the traditional open centre hydraulic system as standard. Delivering 64 litres/minute and is more than sufficient for the majority of applications. An optional 80Lpm option is available, which will power the most demanding implements. If that wasn’t enough, New Holland has engineered a rear Load Sensing HPL. The benefit? System pressure now works at 20 bar lower pressure. The result? Less heat is generated and reduced fuel consumption.

LIFT-O-MATIC PLUS SYSTEM: SPEED AND PRECISION

This award winning mechanical hydraulic control system allows you to raise or lower the rear linkage when making a headland turn, while maintaining position and draft settings. When pushing/pulling the lever, if released, the implement immediately stops at the height corresponding to the actual implement position. A gentle push or pull of this convenient lever allows for minor adjustments.

The post New Holland T4 FNV Speciality Tractors appeared first on Ernest Doe.

Long days will fly by in the deluxe VisionView cab that has been designed around you to maximise your productivity. How? Conceived in virtual reality following extensive consultation with many customers, it offers ergonomic comfort to all operators, and has set a new industry benchmark in this segment. The advanced air conditioning and a full sized instructor seat mean the T4 takes operator comfort to a whole new level. Pleasure. Guaranteed.

POWER AND PRODUCTIVITY

Are you looking for a tractor that offers you outstanding productivity in a compact package? Then the T4 is the natural choice. Advanced Common Rail engines deliver precise fuelling for unbeatable responsive performance and improved fuel efficiency. The range’s power curve is flat between 1900 and 2100rpm for sustained power during demanding operations. An outstanding power-toweight ratio of a mere 30.4kg/hp(CV), further enhances fuel economy. The fully integrated front loader with quick cycle times makes loader applications even more efficient, especially when combined with the hydraulic Powershuttle. Performance. Guaranteed.

LOWER OPERATING COSTS

New Holland is committed to boosting your profitability by lowering your operating costs. The new Common Rail engines reduce your fuel consumption by up to 13% when compared to previous models. The Diesel Oxidation Catalyst (DOC) & Diesel Particulate Filter (DPF) technology for Stage V compliance is maintenance-free and enhances efficiency. Even longer 600 hour service intervals, together with simple daily checks, courtesy of the single piece hood and ground-level service points, make keeping your tractor in tip top condition as easy as 1-2-3.

MAXIMUM VERSATILITY

No two farms are alike, so the new T4 has been engineered by design to offer users ultimate versatility. Perfectly at home in an agricultural environment, it can effortlessly turn its hand to specialist loader or PTO tasks, and is equally capable in transport or field situations. This adaptable all-rounder is also the perfect solution for municipalities and golf courses. Versatility. Guaranteed.

EXACTLY WHAT IT SAYS ON THE BONNET

The T4’s performance is immediately obvious to all users. How? Quite simply it’s on the bonnet. The first two digits ‘T4’ refer to the tractor’s category and the following two, for example ‘75’, refer to the maximum engine power. What does that mean to you? You can buy your T4 safe in the knowledge that its performance will perfectly match your requirements.

The post New Holland T4 appeared first on Ernest Doe.

The spacious VisionView cab offers outstanding all-round visibility, a high visibility roof hatch for comfortable loader operation. All controls are perfectly placed on the CommandArc and easy entry and exit are guaranteed thanks to wide opening doors.

EXCELLENT EFFICIENCY

Equipped with a Stage V compliant FPT Industrial F5 engine, the T5 delivers more efficient power when required and benefits from horsepower and significant torque increases across the range. The optional 40kph ECO transport feature ensures quite and fuel efficient road work.

The post New Holland T5 Utility appeared first on Ernest Doe.

The T5 Electro Command’s compact dimensions are home to the highly efficient FPT Industrial F5 3.6 Litre engine with ECOBlue Compact HI-eSCR 2 technology for Stage V compliance. It delivers increased performance and up to 5% more torque backup for even more productivity.

The post New Holland T5 Electro Command appeared first on Ernest Doe.

This new four-model series, powered by FPT NEF four cylinder 4.5 Litre engines, offers maximum outputs ranging from 110 – 140hp. This is up to 20hp more than the current T5.120 Electro Command model. More comfort, thanks to the addition of the renowned Horizon cab, now available with the new Super High Visibility Roof Panel, which is bigger, quieter and more comfortable.

THE BLUE POWER RANGE

The T5.140 Auto Command model is available in premium Blue Power configuration. Developed for those agribusinesses which are looking for the ultimate in premium agriculture, where performance and comfort are of supreme importance. If you want your tractor to stand out in the field not only for its performance, but also for its looks, then you’ve found your answer.

THE BLUE POWER OPTION FEATURES
• Distinctive metallic midnight blue paint
• Chrome coloured grille
• Silver wheel rims
• Eye catching 3D New Holland logo
• Blue Power seat and branded thick pile carpet
• Silver light surround on cab work lights
• An extensive list of standard equipment

The post New Holland T5 Dynamic and Auto Command appeared first on Ernest Doe.

The industry-leading seat offering includes the Dynamic Comfort range with an ergonomic swivelling backrest and the Auto Comfort seat with active heating and ventilation for day-long comfort.

The post New Holland T6 Electro/ Dynamic/ Auto Command appeared first on Ernest Doe.